| Customization: | Available |
|---|---|
| Type: | Blade Coater |
| Driven Type: | Electric |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Suitable Material:
DBTB Acrylic Adhesive Bopp Tape Coater/Coating machine/making machine is mainly suitable for reel -type substrate coating production.The material such as: Paper ,OPP, Alumium Foil, CPP, PET, Bopp, Fabric, ETC
Characteristics:
1. Heating oven could be opened by hydraulic, The guide roller in the oven was driving synchronous with host machine
2. HMI, Man and machine face to face interface touch screen.
3. High precision auto edge position correction system, Rewing roll will have high precision edge neat
4. With inflammable gas detecting alarm (select for solvent glue );
5. NON-Stop Machine station(Optional)
6. Double layers cycle drying oven, Both sides coating could be finished in One step. (Optional)
7. Each heating section is controlled independent.
.7. Current output type temperature control system makes heating quicker and electricity saving
8. Rewinding controlled by auto diminishing taper tension, it could avoid the materials damaged
9. Machine should be installed on firmly cement ground, need no special foundation, fix expansion bolt on key parts
Parameters:
| Common matters | Raw material | PET, BOPP, PVC, PE, PI,Fabric ,Copper foil,Aluminum foil, etc., |
| Machine speed | 100-250m/min below | |
| Tasks speed | 80-200m/min below | |
| Raw material width | 300~1900mm | |
| Guide Roll | Φ100~120mm Anodizing or hard chrome surface treatment (User Advice) | |
| Control motor | AC Vector Motor, AC Servo Motor | |
| Machine color | MUNCELL NO. F-299002 (User Advice) | |
| OP Panel color | MUNCELL NO. F-553507 (User Advice) | |
| WINDER | Unwinding & rewinding part | 2-axis turrent type or 1-axis center type |
| Reel outer Dia | Φ600, Φ800, Φ1000, Φ1200mm | |
| How to connect raw material | Automatic or manual connection | |
| Splicing type and direction | Flying Arm(T/B), Tapeless(T/B) | |
| Air-Shaft fixing type | 3" Shaft + Adapter(AL or MC nylon) (User Advice) | |
| Dryer | Chamber inner temperature | Max. 200degree |
| Hot blow injection type | Z-Nozzle | |
| Heating source | Electric heater, gas burner, Thermal Oil, Strea heating (User Advice) | |
| Unit Dryer length | 1.8m , 2.2m, 3m, 4m (User Advice) | |
| Coating Head | Developed unit | There are Comma, Gravure coating method .(Mayer bar could be fixed follow Users) |
){kind=link}